SIFAT MENEJMENT TIZIMINING - SINOV VA KALIBRLASH LABORATORIYALARIDAGI O‘RNI

Authors

  • Badalov Nomoz Jo‘raboevich Jizzax politexnika instituti, katta o‘qituvchi
  • Ikramov Dilshod Ikramovich O‘zbekiston Respublikasi Milliy metrologiya instituti DM Jizzax filiali, bosh mutaxassis
  • Badalov Utkirbek Nomozovich Jizzax politexnika instituti, Magistri

Keywords:

product, standard, metrology, resources

Abstract

To assess the uncertainty of measurements in test and calibration laboratories, the calibration laboratory or test laboratory performing its own calibrations shall have a procedure for estimating measurement errors and apply it to all measurements in the concentration range. Validation in testing and calibration laboratories is the process of verifying that certain requirements of a specific intended use are being met and providing objective evidence.

Downloads

Published

2022-04-14

How to Cite

Badalov Nomoz Jo‘raboevich, Ikramov Dilshod Ikramovich, & Badalov Utkirbek Nomozovich. (2022). SIFAT MENEJMENT TIZIMINING - SINOV VA KALIBRLASH LABORATORIYALARIDAGI O‘RNI. E Conference Zone, 67–71. Retrieved from http://econferencezone.org/index.php/ecz/article/view/429

Issue

2022: IDESH-ITALY may

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Similar Articles

You may also start an advanced similarity search for this article.

Most read articles by the same author(s)